E36 Part out: lots of aftermarket stuff (updated)

[kaiv]

(NEW PICS/ALL PICS now in post#1!)

The seat are sports and powered and received many compliments: $400

http://relaxkev.free.fr/TEMPTEMP/carpet ... G3912r.jpg

OEM M3 bumper's euro plate holder

http://relaxkev.free.fr/goodbye/Photo572.jpg


OEM M3 mouldings. $100

http://relaxkev.free.fr/goodbye/Photo650.jpg


OEM 3.23 25% LSD. Low mileage, about 60k since rebuild, works perfectly ! $500
DOn't but a shady diff with unknown condition ;) (internals shown, the diff comes complete)

http://relaxkev.free.fr/goodbye/Photo653.jpg


Metrix Motorsport 3.46 40% LSD LESS THAN 500 miles !! 3 year warranty. $1250

http://img237.imageshack.us/img237/7231/346difffb0.jpg


Bilstein PSS coilovers. Low mileage excellent condition complete kit, only $750

Also have Meyle HD RSMs.

http://relaxkev.free.fr/goodbye/PPSkit_1.jpg
http://relaxkev.free.fr/goodbye/PSSkit_2.jpg

UUC-Wilwood Front brake kit LOW mileage, only 1500 miles, if that!! $1100
Kit is complete as if you ordered it through UUC.
Included are Porterfiled R4-S pads.

These 4 piston forged calipers are lighter than the stock mono piston!

Again excuse the dust on the pics, i didn't have cleaner handy.

http://relaxkev.free.fr/goodbye/Photo618.jpg

http://relaxkev.free.fr/goodbye/Photo619.jpg

http://relaxkev.free.fr/goodbye/Photo627.jpg

http://relaxkev.free.fr/goodbye/Photo635.jpg


UCC hybrid FCABs Low mileage $200 (only 11k miles!)


OEM 325is sway bars $50

OEM 95 M3 sway bars $50

http://relaxkev.free.fr/TEMPTEMP/E36par ... MG3252.JPG


Brembo rear rotors less than 1000miles $50


Porterfield R4-S rear pads less than 1000miles $60


Bosch 21.5/lb/h injectors $70

http://relaxkev.free.fr/goodbye/Photo580.jpg


Turner chip (tuned for 95 413 DME for 3.0l or 3.2l with 3.5" HFM and 24# injectors) $200

http://relaxkev.free.fr/swap_pics/24.JPG


3.5" HFM (from 740i E38) $150

Cosmos V2 Intake $120 (it's the $179 version) $120

Samco Sport elbow (throttle body to 3.5"hfm) $80

http://relaxkev.free.fr/goodbye/Photo560.jpg

http://relaxkev.free.fr/goodbye/Photo561.jpg


OBD2 midpipe converted to OBD1 only less than 88k miles, passes smog with flying colors, has OBD2 bungs plugged and a single precat OBD1 bung welded. $200

http://relaxkev.free.fr/swap_pics/20.JPG


Forgeline RS competition wheels. Set of 5, 17x9 2 piece forged ET40 or 41 (E36 fitment) $1500


brand new in box: powerflex subframe bushings $120

http://relaxkev.free.fr/goodbye/Photo579.jpg


brand new: OEM/turner rear subframe reinforcement kit

http://relaxkev.free.fr/goodbye/Photo578.jpg


Auxiliary fan #1. One corner of the shroud is broken. Fan works great.

http://relaxkev.free.fr/goodbye/Photo570.jpg


Auxiliary fan #2. This one is flawless and low mileage. Just a bit dusty

http://relaxkev.free.fr/goodbye/Photo571.jpg


Strut hats covers (strut tower covers are sold)

http://relaxkev.free.fr/goodbye/Photo573.jpg


DJ Auto elliposoids. Glass has some peeting from lots of highway driving. Included will be high output silerstar bulbs (used a couple of time literally, $40 worth)
$50

http://relaxkev.free.fr/goodbye/Photo574.jpg


Full set of ambers for coupes (sides are for 95/96)

http://relaxkev.free.fr/goodbye/Photo651.jpg


1996 328 rear speakers in good condition (non HK)

http://relaxkev.free.fr/goodbye/Photo654.jpg

Supersprint catback: has bad rust where the pipes connect to the muffler.
Still works, and sounds great. Tips are nice. Make offer. Local pick up only.

Also have stock front/rear calipers

Driveshaft with brand new (never used) center bearing assembly

Black center console

Black glove box

Window switches

Supersprint catback: has bad rust where the pipes connect to the muffler.
Still works, and sounds great. Tips are nice. Make offer. Local pick up only.

stock front/rear calipers with brackets

Driveshaft with brand new (never used) center bearing assembly

Black center console

Black glove box

Window switches

schwarz II mirrors

clutch slave cylinder

headlight switch/vents

center arm rest with console /cup holder etc

sunglasses/wallet holder thing

set of OEM wheel locks

power mirror switch

alternator duct

OEM oxygen sensor

cruise control module

center console

steering column guibo (1 year old)

tranny/driveshaft guibo (1 year old)

engine mounts (1 year old)

H&R 15mm spacers with extended lugs

Front strut tower reinforcement plates (OEM)

Rear shock tower reinforcement plates (UUC)

------------------------------------------------------------
------------------------------------------------------------
------------------------------------------------------------
OBC: SOLD

M3 cluster: SOLD

Front door panels: SOLD

M3 bumper: SOLD

M3 plate delete moulding: SOLD

OBD1 S52: SOLD

X-brace: SOLD

ZHP knob: SOLD

Fog deletes: SOLD

Glove box trim piece: SOLD

Spal fan w/ wiring: SOLD

24# injectors: SOLD

UUC sways: SOLD

understeer ssk: SOLD

delrin shifter bushings: SOLD

trunk lid: SOLD

gas door: SOLD

Motorsport strut tower covers: SOLD

Sideskirts: SOLD

Chassis: SOLD

All body panels: SOLD

RTABS/trailing arms/subframe: SOLD

Radiator: SOLD

Front strut mounts: SOLD

Head unit: SOLD

Expansion tank: SOLD

Low temp fan switch: SOLD

Carbon fiber roof panel pending sale

Roll bar is pending sale

5 speed getrag pending sale

Many parts are new or low mileage please ask.

Thanks,

Kevin

[fcvapor05]

Why

[kaiv]

I just got to the point where I question dumping more money into the car.

It's an awesome car, I love it, puts a smile on my face everytime I drive it so this wasn't an easy decision but whatever I do it'll still have scratches, nicks, chips down to bare metal all over etc. It's been getting to me. Doing a full repaint is out of the question and would just be a bad financial decision

I'm just gonna look for something newer.

[fcvapor05]

[DEFKON99]

nice e36 so your going back to stock and selling or stripping the whole thing ?

[Volfinator]

How much you want for the diff?

[kaiv]

Defkon, I'm stripping the whole thing

Volf, I have two diffs available,

A Metrix Motorsport 3.46 40% with about 500miles (just broken in) for which I'm asking $1250 right now ($1400 new)
It has a 3 year warranty.

and a OEM 3.23 25% this diff has 60k documented miles since rebuild. I popped the cover off and everything looks perfect (let me know if you want pics), no leaks whatsoever, perfect used diff. I'm asking $500 for it.

[ali]

at the very least can you please copy your post over to here lol. It will help in the event of questions.

-Ali

[kaiv]

Sir yes sir. Good idea

[kaiv]

Updated first post.

[nomade30]

PM'd Also didn't include would you sell my insert ring on the center console? Or how much for the center console thing cup holder and all?

[kaiv]

Replied to you via PM.

[Volfinator]

Such a sexy looking beast. Too bad you're selling it

[Fasterthanyou]

Want the front nose piece (Panel with the grills). Lemme know how much.